Hi sir/madam
Glad to know your company from the internet .
This is Eric from Changai electronic science & technology Co.,LTD in China. We are specialized in gas sensor ,analyzers & systems for 10 years, hope to find a way to cooperate with you!
Please find the pictures and information of our Portable trace oxygen analyzer , which have a minimum accuracy of 0-10PPM. If you had any intreasting , kindly contact with me .
GNL-IN93 portable trace oxygen analyzer
Introduction
CI-IN93 trace oxygen analyzer is an intelligent analyzer which based on microprocessor. The sensor it uses is fuel cell type oxygen sensor and it can measure 0-25% of oxygen concentration, but it is best to measure oxygen concentration in 0-1000ppm environment.
Features
Oxygen concentration, data and instrument working state are shown on the 128×64 LCD, not easy to damage;
Over pressure protecting function,
Pressure compensation function,
Over range protection function,
Oxygen concentration controlling function,
Latest touch the key technology
Unique magnetic valve protective gas path
Technical Specifications
Sensor:Electrochemical sensor
Accuracy: 0-10ppm ±5%FS.
0-100ppm ±3% FS.
0-1000ppm ±2% FS.
Repeatability: 0-10ppm ±2.5%FS.
0-100ppm ±1.5% FS.
0-1000ppm ±1% FS.
Stability:0-10ppm ±2.5% F.S/7d 0-100ppm ±1.5% F.S/7d 0-1000ppm ±1% F.S/7d
Sensitivity:0.5%F.S
Response time:T90<60S(25°C)
Contact Capacity: 240V.AC,0.2A
Power supply:200-240V.AC,50/60Hz
Ambient Temp:0-45°C
Ambient humidity:<80%RH
Sample Gas Temp.:0-45°C
Sample gas pressure: 35-210KPa
Gas Flow:1-1.5L/min(suggesting 1.2L/min)
Measuring Medium: Anti-H2: N2, H2, He, Ar and carbon dioxide gas;
Anti-CO2: N2, H2, He, Ar and gases whose CO2 concentration is higher than 1000ppm and carbon dioxide gas
Sensor Life: 24 months Instrument Life:>50, 000 hours
Dimension:260.5mm(L)×160mm(W) ×194mm(H) Communication:RS232/RS485
Applications
It can be used to measure oxygen concentration in the fields of air separation, gas production, semiconductor Industry, reflow and wave soldering, food production, petrochemical engineering etc.
Order Knowledge
l Measure range
l Tested gas pressure & temperature
l Gas composition & impurities
Basic PLC Ladder Programming Examples 23 Basic PLC Ladder Programming Training Examples for Beginners. Hi friends, here we are starting unique a series of Free Training on PLC Ladder Programming & tutorials. These PLC Ladder Programs are important to learn basics of Ladder programs. Example 7: Sequential control If we serially connect the normally closed contact of Y2 in example 5 to the circuit of Y1 as an AND condition for Y1 (as the diagram in the left hand side), the circuit can not only make Y1 as the condition for Y2, but also allow the stop of Y1 after Y2 is enabled. Therefore, we can make Y1 and Y2 execute exactly the sequential control Example 8: Oscillating circuit The ladder diagram above is a very simple one. When the program starts to scan the normally closed contact Y1, Y1 will be closed because coil Y1 is Off. When the program then scan to coil Y1 and make it On, the output will be 1. When the program scans to the normally closed contact Y1 again in the n...
Comments
Post a Comment